BrainPad Arcade Motors and Sensors

As has been mentioned, there are people working with MakeCode Arcade and JACDAC and hardware. We have tried sensors and motors with edge connected processors and Arcade with some success. I have tried Brainpad Arcade after soldering on female headers to the pin-outs and do get power to motors of 2 wires DC using ground and voltage but do not get control via data signal; using “pins” extension in Arcade. Also, when trying to install the
Github BrainPad Extension from the Github URL ; that repo. written by Gregory, Arcade can find no extension. So what is the secret? Here’s the simple program that I tried:

There is an email going out this week to some key people explaining a lot of things that has been happening behind the scenes. Keep an eye for it please.